MECHANICALALLOYING相关论文
In this study,we prepared GdZn2 by mechanical alloying method and measured its magnetization to reveal the magnetic and ......
Microstructure and Mechanical Properties of AlSiTiCrNiCu Particles Reinforced Al6061 Composites by S
Three groups of AlSiTiCrNiCu high entropy alloy (HEA) particles reinforced Al606l composites were fabricated by spark pl......
Dual phase equal-atomic NbTaTiZr high-entropy alloy with ultra-fine grain and excellent mechanical p
Super-high strength NbTaTiZr high-entropy alloys (NbTaTiZr HEAs) have been successfully fabricated by the mechanical all......
...
...
The corrosion behavior of Al-5 at.％ Cr,Al-5 at.％ Si,Al-5 at.％ Mo and Al-5 at.％ Ti produced via casting and Al-5 at.％ Cr produ......
Effect of Milling Tools on the Microstructure and Property of Cu-Based Composites Prepared by Mechan
Cu and Nb powders were used as starting materials to produce Cu-Nb and Cu-NbC-WC composites by mechanical alloying.X-ray......
Effects of Mechanical Alloying Parameters on the Microstructures of Nanocrystalline Cu-5 wt％ Cr Allo
...
The ultrafine crystalline CuCr50(Cr 50 wt%) alloys were fabricated by a combination of mechanical alloying and spark pla......
A simple and fast method of preparation of vanadium carbide (V8C7) nanopowders using mechanical alloying assisted microw......
The structured powders of Fe and FeNi3 effectively by mechanical alloying (MA) method were prepared.It was found that we......
Plastic deformation is a well-known process to improve the wear and fatigue resistance of a metal surface. Many processe......
Oxide dispersion strengthened(ODS)steel,because of its excellent anti-radiation performance and high temperature mechani......
Using silver powder with a purity of more than 99.95% and silver-coated carbon nanotubes as the raw materials, multi-wal......
通过激光熔覆技术制备了自组装 Cu92Fe8偏晶复合涂层,研究了其相分离特征、显微硬度、耐腐蚀和磁学性能。结果表明,球磨后Cu92Fe8......
Microstructural modifications and appropriate element doping are necessary to simultaneously enhance the electrical cond......
Formation of Fe-19 wt％Cr-9 wt％Ni Nanocrystalline Alloy with Excellent Corrosion Resistance:Phase Tra
In this paper,microstructure characteristics and phase transitions of Fe-19 wt％Cr-9 wt％Ni nanocrystalline alloy are com-pr......
Fabrication and property of high-performance Ag-Pb-Sb-Te system semiconducting thermoelectric materi
High performance Ag-Pb-Sb-Te system thermoelectric bulk materials were fabricated by a combination of mechanical alloyin......
Magnetic properties of nanocrystalline Fe60Cr40 powders prepared by mechanical alloying in vacuum and air were investiga......
将机械合金化（MA）和自蔓延高温合成方法（SHS）制得的MoSi２粉末进行烧结，研究了两种粉末压块的烧结工艺。结果表明，在烧结时间一定的情况下，M......
研究了两种真空热处理条件对用机械合金化法制得的Ｔｉ６５Ｎｉ３５非晶合金化学行为的影响。发现低温热处理后的合金在较魇放电速率下仍然有比较大......
The effect of alumina nanoparticle addition on the microstructure and tribological properties of a CuCrW alloy was inves......
...
分析了Mg-Ni二元合金研究的理论和现实意义.指出机械合金化是提高Mg-Ni二元合金储氢性能的有效制备方法,并重点分析了球磨方式对合......
采用机械合金化＋热压工艺制备了含Laves相的Cr2Nb基复合材料，研究了Cr、Nb元素粉经不同球磨时间后在1250℃×30min热压工艺下所......
...
探索了结合复压复烧和瞬间液相烧结工艺制备机械合金化Ａｌ－Ｔｉ合金的方法，获得了在Ａｌ基体上弥散分布直径为（０．２￣０．５）μｍ的Ａｌ３Ｔｉ颗粒，接近于理论密度的Ａｌ－Ｔｉ合金，并分......
指出了机械合金化的主要原理为高效球磨作用，并概述了机械合金化的主要应用领域，总结了该方法的主要特点，以及在制备复相陶瓷材料中的......
